Urinal toilets are becoming increasingly popular in homes, offices, and public restrooms thanks to their space-saving design, water efficiency, and hygienic advantages. Whether you're upgrading your personal bathroom or improving a commercial restroom, proper installation is key to ensuring a clean, reliable, and long-lasting setup.
In this guide, you’ll find a step-by-step walkthrough that will help you install a urinal toilet with confidence—even if you have limited plumbing experience.
Why Install a Urinal Toilet?
Before diving into the installation steps, let’s quickly explore the key benefits of adding a urinal toilet to your space:
Improved Hygiene
Urinal toilets help reduce splash-back and keep bathroom floors cleaner, which is especially valuable in shared or high-traffic spaces.
Water Conservation
Many urinal toilets use significantly less water per flush compared to standard toilets, making them an eco-friendly choice.
Space-Saving Design
Wall-mounted urinal toilets are compact and ideal for bathrooms with limited space.
Convenient for High-Use Areas
They’re perfect for households or public spaces where quick, efficient use is a priority.
Tools and Materials You’ll Need
Gathering the right tools and materials in advance will make the process smoother.
Basic Tools:
- Adjustable wrench
- Spirit level
- Drill and wall anchors
- Screwdriver
- Silicone sealant or plumber’s putty
- Measuring tape
Materials:
- Urinal toilet unit
- Flush valve (manual or sensor)
- Waste outlet trap and drain pipe
- Mounting hardware (bolts, brackets)
Step-by-Step Urinal Toilet Installation Process
Follow these steps carefully for a secure and hygienic installation.
Step 1: Prepare the Installation Area
Start by turning off the water supply to the bathroom. Remove any old fixtures and ensure the wall is clean and sturdy. Measure and mark the mounting height for the urinal toilet according to the manufacturer’s instructions. Make sure the drain and water supply lines are properly positioned.
Step 2: Install the Mounting Hardware
Use a drill to install wall anchors or bolts that will support the urinal. Double-check with a spirit level to ensure the urinal will sit evenly and securely.
Step 3: Secure the Urinal Toilet
Carefully place the urinal toilet onto the mounting bolts or brackets. Tighten the nuts firmly, but be cautious not to over-tighten and crack the fixture.
Step 4: Connect the Water Supply and Drain
Attach the flush valve to the water supply and connect the urinal’s waste outlet to the drain pipe. Ensure all joints and seals are tight to prevent leaks. Some installations may require a P-trap or special waste fitting—always refer to the product guide.
Step 5: Apply Sealant and Test the Setup
Seal around the edges with silicone to prevent water seepage. Turn the water supply back on and test the flushing system multiple times to check for any leaks or drainage issues.
Maintenance Tips for Longevity
- Clean the urinal regularly with mild, non-abrasive cleaners to prevent buildup and odors.
- Inspect flush valves and seals periodically for signs of wear.
- For sensor flush urinals, check battery levels and sensor sensitivity to ensure proper function.
Common Mistakes to Avoid
- Incorrect Alignment: A misaligned urinal can lead to leaks or uncomfortable use. Always double-check levels.
- Loose Seals: Skipping sealant or improperly securing joints can cause leaks over time.
- Over-Tightening Fixtures: This can crack ceramic or porcelain urinals, leading to expensive replacements.
- Neglecting Regular Cleaning: This can cause odors and reduce the lifespan of the fixture.
Conclusion
Installing a urinal toilet is a practical way to improve bathroom hygiene, save space, and reduce water use. With the right tools and a careful step-by-step approach, you can achieve a clean and hassle-free setup that benefits both private and public spaces.
For more expert bathroom solutions, installation tips, and product recommendations, visit TrueToilet.com—your trusted resource for smarter toilet upgrades.